OneUp

OneUP

OneUp EDC TOOL PUMP

300.00 NIS

The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.

PUMP VOLUME

A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market.

FAST-ON HEAD

Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.

EDC PUMP SPEC

2 Sizes: High Volume 100cc

1-1/4" dia x 10" for 100cc (32mm dia x 254mm)

100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule
Fast-On Head (Presta Only) - No threads or locking levers
Integrated CO2 Inflator
Fully Sealed, Weatherproofed Internals
Includes Bottle Cage Mount

Material: 6061-T6

Weight: 160g - 100cc (without EDC tool system)

Colour: Black

Patents Pending

Inflator Instruction

thread CO2 cartridge fully onto inflator head
press inflator head onto presta valve
to inflate back off CO2 cartridge a half turn
tighten CO2 cartridge to stop inflation

OneUP

OneUp EDC LITE TOOL

200.00 NIS

The included 9 function Multi Tool contains your most used tools and
is designed to live inside your stem/steerer tube.

Never get stuck without a Multi Tool on a ride ever again.

⬢ 2, 2.5, 3, 4, 5, 6, 8mm

⁕ T25 Torx

▬ Flat Head Screwdriver

Light weight (Adds just 75g to your bike)
VERY easy to install in less than 5 mins.
Available in 7 colors (Black, Red, Blue, Green, Orange, Purple, Turq)
No need to remove your star nut or thread your steerer tube.
Color matched to our Composite Pedals, Grips and Handlebar Decals.

OneUP

OneUp EDC V2 TOOL

300.00 NIS

All your trailside tools, always on your bike and instantly accessible

The EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast.

Whether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical.

NEW FOR 2020

Easier to remove from your bike, with a lower friction design.
Updated Chain Breaker is easier to use and has a steel body for increased durability
Stronger steel Spoke Keys
Black Multi-Tool
Tubeless plug jabber cover (Small storage capsule)

TOOL FEATURES (20 functions, 130g)

Includes a 10 function Multi-Tool, Tire Lever and Chain Breaker.

MULTI TOOL FEATURES (10 functions, 58g)

2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx. Flat Head Screwdriver. EDC Top Cap Tool
The EDC Tool contains no loose, easy to lose driver bits
Ultra compact and super lightweight.

TIRE LEVER/CHAIN BREAKER FEATURES

Tire Lever, Chain Breaker, 0,1,2,3 Spoke Keys, Presta Valve Core Tool, Spare Rotor Bolt

CARRIER FEATURES
Spare Quick Link Storage
12,16, 20g CO2 Cartridge Storage or 2 x Sealed Storage Capsules

STORAGE CAPSULE

The V2 EDC tool now comes with a small and a large sealed storage capsule.

The new small capsule is used to cover your jabber and preloaded bacon strip keeping it sticky for longer. The small capsule can be used with EDC Threaded options. It also allows you to use the EDC tool and tubeless plug kit inside the small 70cc OneUp pump. The large capsule only fits inside an EDC Threaded setup, EDC Stem or 100cc pump. The small capsule can be installed inside the large capsule for separating items.

Storage Capsule Suggested Pack List (not included): Cash ($20 Note), Zip ties, Park TB-2 Emergency Tire Boot, Waterproof matches, Glueless patches.

EDC TOOL STORAGE OPTIONS

The EDC Tool was designed to be stored inside your stem/steerer tube or inside the high volume, CNC Aluminum, EDC Pump with integrated CO2 inflator head. Grabbing your EDC tool from the pump is as easy as reaching for your water bottle.

COMPATIBILITY
Backwards compatible with all V1 EDC Tool storage options.

PATENTED
US 10,197,049
Other patents Pending

STORY
We always prefer to ride without a backpack, whenever possible in Squamish. But no one wants to be 'that guy' who needs to borrow tools when out on a ride, or has to hike down the trail with a broken bike. We wanted a solution that would allow us to carry the essential tools that we need for every ride, without wearing a bulky backpack, which is why we created the EDC tool system.

For rides under 3 hours we recommend storing your EDC Tool in your steerer tube, with the Tubeless Plug Kit installed and already loaded with Bacon in case you get a flat.

By attaching your complete tool system to your bike you can be sure to never forget your repair kit.

We carry the 70cc pump mounted to our water bottle cage with a spare tube strapped to our frame using a OneUp Gear Strap, just in case you can't fix a puncture with your tubeless plugs. This leaves your pockets free for keys, phone and snacks.

For rides over 3 hours we add a fanny pack or small backpack so that we can pack more food and water, a jacket, merino base-layer and a basic first aid kit.

A small backpack weighs around 1.5lbs (680g) completely empty. That's the weight difference between a carbon and an aluminum frame.

FORK COMPATIBILITY CHECK

INSTALL INSTRUCTIONS

All compatibility and fit determinations have been made solely by OneUp. Use of this or any other aftermarket product may void any warranty you have with the original part manufacturer.

OneUP

OneUp BASH GUIDE - ISCG05 - V2

360.00 NIS

Eliminate dropped chains forever with the new OneUp Components Bash Guide.

As the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an all new tool less flip

The OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only 105g (34T) you may forget it’s even there.

NOT JUST FOR ENDURO RACERS.

The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention.

The OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T.

FEATURES

Tool less upper guide flip
Install without removing your crank
Single tool install and adjustment
Boost compatible
Oval Compatible
Black Stainless Steel hardware
Includes 3 bash plates (28-30T, 32-34T, 36T)
Patented US 10,053,188 Other Patents Pending

SPECS

Weight: 90g 28-30T, 105g 32-34T, 110g 36T
Capacity: 28-36T

Chainline: 7.5mm adjustment

Mount: ISCG05

Color: Black top guide piece included

Material: 7075 aluminum, top guide glass reinforced thermoplastic

GUIDE SETUP INSTRUCTIONS

1. Remove top guide by removing the front top guide nut with a 4mm hex (never adjust the rear T25 bolt).

2. Set slider in the highest position. (inserted a 4mm into the hole on the bottom left of the top device with the chain link symbol and backed it out anti-clockwise).
3. Hold backplate directly against ISCG05 tabs. Check for clearance between the back side of the bashplate/guide and the bike frame (use included 2.5mm spacers if necessary to space the backplate away from the frame).

4. Rotate backplate until slider adjustment bolt is directly above the crank axle and torque bolts to 5Nm
5. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain
6. Determine the corresponding number of chainline shims required
7. If more than 5 shims are required, install the supplied 2.5mm washers behind the backplate and return to step 2
8. Assemble top guide with spacers and tighten bolt to 3Nm

9. Insert a 4mm hex through the hole in the inner top guide, loosen height adjustment bolt and lower the tool onto the chain. Torque to 3Nm to set heigh

BASH REPLACEMENT INSTRUCTIONS

1. Remove Bash Guide from bike

2. Remove bolt retaining clip from rear bash plate bolt by pushing a 4mm hex through the bolt from the backside of the guide.

3. Remove Bash bolts using a 5mm hex

4. Select desired bash plate and reinstall bash bolts to 6Nm

5. Reinstall bolt retaining clip on the rear bash plate bolt

6. Reinstall Bash Guide onto bike

OneUP

OneUp Grips

150.00 NIS

A low profile single lock on grip, designed to reduce arm pump and hand numbness. The Diamond knurled texture, with saw tooth finger ramps and a super tacky 20A compound provide ultimate traction. More traction means less death-gripping the bars and less arm pump. Our single lock has the profile of your favorite double lock-on. But to reduce hand numbness we've replaced the hard outer clamp with extra rubber for greater cushioning of your palm heel. Get all the benefits of an “ergonomic” grip without the city bike cruiser look!

SPECS

Weight: 97g (Pair)
Length: 136mm

Diameter: 30mm

Colours: Black, Red, Green, Blue, Orange, Turquoise & Purple

OneUP

OneUp CHAIN GUIDE - ISCG05 - V2

280.00 NIS

Eliminate dropped chains forever with the new OneUp Components Guide.

As the trend for lower and slacker bikes continues, 'Little bikes' are getting more and more capable everyday. Revised for 2019 the OneUp Guide uses simple, one tool installation and adjustment as well as an all new tool less flip

At only 40g the OneUp Chain Guide weighs less than a sip of water.

WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING?

NW rings are awesome, but they're not perfect and every once in a while you can drop a chain while riding. On a social ride this means getting dropped by your friends. But when racing an Enduro a dropped chain can cost you the podium, which is why almost every EWS pro runs both a chainguide and narrow wide chainring.

FEATURES

Tool less upper guide flip
Install without removing your crank
Single tool install and adjustment (4mm hex)
Boost compatible
Oval Compatible
Black Stainless Steel hardware
Patented US 10,053,188 Other Patents Pending

SPECS

Weight: 40g
Capacity: 26-38T

Chainline: 7.5mm adjustment

Mount: ISCG05

Color: Black top guide piece included

Material: 7075 aluminum, top guide glass reinforced thermoplastic

GUIDE SETUP INSTRUCTIONS

1. Remove top guide by removing the front top guide nut with a 4mm hex (never adjust the rear T25 bolt).

2. Set slider in the highest position. (inserted a 4mm into the hole on the bottom left of the top device with the chain link symbol and backed it out anti-clockwise).
3. Hold backplate directly against ISCG05 tabs. Check for clearance between the back side of the guide and the bike frame (use included 2.5mm spacers if necessary to space the backplate away from the frame).

4. Rotate backplate until slider adjustment bolt is directly above the crank axle and torque bolts to 5Nm
5. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain
6. Determine the corresponding number of chainline shims required
7. If more than 5 shims are required, install the supplied 2.5mm washers behind the backplate and return to step 2
8. Assemble top guide with spacers and tighten bolt to 3Nm

9. Insert a 4mm hex through the hole in the inner top guide, loosen height adjustment bolt and lower the tool onto the chain. Torque to 3Nm to set height

OneUP

OneUp COMPOSITE PEDALS

295.00 NIS

MTBR 5 STAR REVIEW - READ THE FULL REVIEW HERE

"The pedals performed flawlessly and just seemed to get better with time as they spun more freely and the edges were smoothed out. The best thing about them is the grip. Heel down, heel up or pedaling out of saddle, the pedals always provided reliable and predictable grip."

"Are they better than the venerable Race Face Chester pedals at $55? Yes! They weigh exactly the same at 360 grams but the OneUps deliver much more grip.

The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle.

FEATURES

10 rear loading Steel pins / side, with Nyloc nuts
DU plus cartridge bearing axle system
Thin leading edge chamfered design to deflect off obstacles
Wide platform design for increased stability
Contoured shape provides ultimate connected feel

SPECS

Weight: 355g
Platform Size: 115x105mm

# of Pins: 10 per side

Axle Material: Black chromoly steel

Height: 18.5mm (13.3 at the leading edge)

Pin to Axle distance: 108mm

Color: Stealth Black, Red, Blue, Orange

Body Material: Nylon Composite

INSTRUCTIONS
Install with 6mm Hex or 15mm pedal wrench. Torque to 35Nm (25 ft-lbs) Min

OneUP

OneUp EDC GEAR STRAPS

85.00 NIS

A stretch polyurethane strap with tail clip for neat and secure fastening of your spare tube or gear to your frame. Our strap doesn’t absorb water and mud like a Velcro strap and won’t scratch your frame.

KIT INCLUDES

2x EDC GEAR STRAPS

SPEC

Material: UV Stabilized Polyurethane

Weight: 18g per strap

Length: 355mm (14")

Compatible with: all the bikes

Colors: Grey

OneUP

OneUp ALUMINUM PEDALS

650.00 NIS

VITAL-MTB 4.5/5 Star Review - Read the full review here

“With a thin and wide design that provides plenty of grip and stability, the OneUp aluminum pedals offers great performance in a durable and easy to maintain package”

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, the OneUp Aluminum Pedals won't slow you down on the climbs.

Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More.

Each pedal contains 4 double sealed full cartridge bearing and no bushings, to eliminate axle play and provide ultimate long-term durability. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy.

FEATURES

10 rear loading custom hexagonal removable pins per side for maximum grip
4 sealed cartridge bearings per pedal
Ultra thin leading edge chamfered design to deflect off any obstacle
Fully sealed and serviceable design with built in bearing extractor
Wide platform design for increased stability
Contoured shape provides ultimate connected feel

SPECS

Weight: 355g
Platform Size: 115x105mm

# of Pins: 10 per side

Axle Material: Chromoly steel

Height: 8.3-12mm

Pin to Axle distance: 112mm

Body Material: 6061-T6 Aluminum

INSTRUCTIONS

Ensure flange pedal washer and lip seal are assembled with flange side towards crank. In the following orientation. We recommend an additional standard pedal washer to be used with counter bored cranks in between our pedal and the crank.

Install with 8mm Hex. Torque to 35Nm (25 ft-lbs) Min

NOTE: Uninstalled pedals may have minimal axial movement that is eliminated upon install on cranks. The retaining O-ring is only to keep the flange washer and seal on pedal in the box and for assembly. It is not necessary for the function of the pedal and can be removed.

Maintenance and Rebuild Procedure

OneUP

OneUp Carbon Handlebar

750.00 NIS

ONEUP CARBON BARS. Strong, lightweight & vertically compliant.

The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer.

The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right.

"The OneUp bar gives me all of the confidence inspiring attributes of a 35mm bar with a bit of forgiveness engineered in for those big descents. I've been so impressed after putting it through the paces for the last year." —Thomas Vanderham

Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle.

The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone.

We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains.

Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right.

SPECS

Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up

Weight: 20mm Rise (220g) 35mm Rise (225g)

Max Stem Clamp Width: 65mm

Max Control Torque: 5Nm

Colour: Black.

OneUP

OneUp EDC THREADLESS CARRIER

165.00 NIS

Important Check Fork Compatibility before purchasing

A Threadless, no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube. EDC Tool sold separately.

The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool.

Easy to install in less than 10 minutes. Install instructions

Available in 8 colours

(Black, Red, Green, Blue, Orange, Purple, Gold & Oil Slick)

Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule.

Chain pliers are not compatible with the threadless carrier set up.

The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)

ENSURE YOUR FORK IS COMPATIBLE - VERY IMPORTANT

Incompatible forks: Fox 38 with oval steerer (Use a EDC Threaded install), Giant Overdrive 2 Forks. Cannondale Lefty Forks. Carbon Steerers

STEERER TUBE LENGTH

Most forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases your fork steerer tube length must meet the minimum length requirement.

Fox except Fox 38 with oval steerer = 190mm min
RockShox Forks = 220mm min
All other compatible forks = 190mm min

Measure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.

OneUp-Components-EDC-Threadless-Measure-Bolt-Length

OneUP

OneUp EDC LITE PLASTICS KIT

90.00 NIS

EDC LITE PLASTICS REPLACEMENT KIT

KIT CONTAINS

1x Inner Carrier
1x Outer Carrier (Black)
1x Flat-Head Bolt, M6x30
1x Socket-Head Bolt, M6x85 (installation)

OneUP

OneUp DECAL KIT

35.00 NIS

ustomize the decal colour of your OneUp Carbon Handlebar with this die cut vinyl decal kit. Also includes extra decals for your bike, helmet, water bottle, truck or dog*. Choose from 12 colours.

Red, Green, Blue, Orange, Purple, White
Gloss Black (looks awesome on the carbon bar)
Turquoise (Yeti Turq)
Oil Slick (Shiny Holographic)
Silver (Matches Pike and Lyric's Polished Chrome)
Gold Matte Metallic (matches Kashima and Gold Cassettes)
Bronze Matte Metallic (matches Copper cassettes)

*OneUp does not recommend applying decals to animals.

HOW TO APPLY
Step 1: Cut out the decal you want to apply from the sheet
Step 2: Remove the White paper backing
Step 3: Apply decal
Step 4: Remove the clear transfer tape, leaving only your coloured decals

OneUP

OneUp DROPPER POST - V2

1,100.00 NIS

FEATURES

Travel adjust shims allow you to custom tune your post to dial in your perfect length.
Cable actuated for easy installation and a simple no bleed remote
Ergonomic remote paddle position
Reliable sealed cartridge internals
User replaceable cartridge only $60 USD
Easy to service at home
2 year warranty

UPDATES

Shortest total length of any dropper
Shortest stack height of any dropper
New upper DU Bushing in the upper collar
Increased bushing overlap and durability
100-210mm post lengths in 10mm increments.
20g lighter

SPECS

Drop 120mm, 150mm, 180mm, 210mm adjustable*.

Diameter 30.9, 31.6, 34.9

Routing Internal only

Remote Compatibility:

SRAM Matchmaker X - SRAM MMX clamps
Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100
Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only
22.2mm Bar Clamp - All other groups 10 speed SHIMANO
Cable clamping remote only (post requires cable stop to be assembled at base of post)

Travel Reducing Shim Reduces travel by up to 20mm.

Weight

Post Only

(30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g
(31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g
(34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g

Remote Only

Remote with 22.2mm Bar Clamp - 46g
Remote with SRAM Matchmaker X / I-spec-EV - 43g
Remote with Shimano I-spec-EV - 43g
Remote with Shimano I-spec II - 41g

Housing and Cable (1300mm installed length) - 50g

Patented drop rail clamp (10,370,051) other patents pending

Warranty 2 Years

Use the tool below to find the longest OneUp post that will fit your bike:

DROPPER POST LENGTH SELECTOR

*NOTE: 2 sets of 10mm shims come stock with every dropper

OneUP

OneUp DROPPER POST REMOTE - V2

250.00 NIS

A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER

An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever.

NO BLEEDING

The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand.

Kit includes cable and housing

Compatible with all cable actuated dropper posts.

SPECS

Weight:

Remote with 22.2mm Bar Clamp - 46g
Remote with SRAM Matchmaker X - 43g
Remote with Shimano I-spec-EV - 43g
Remote with Shimano I-spec II - 41g

INSTALL INSTRUCTIONS

22.2mm Clamp

Loosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano)
Attach the remote body to the clamp using your preferred mounting hole.
Torque the remote body to the clamp using a 3mm hex to 3Nm
Loosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever
Snug the 22.2mm clamp to 1Nm max.

Shimano I-spec II (M9000, M8000, M6000 etc)

Remove the lever mounting bolt completely from the left brake using a 4mm hex
Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp
Remove the plastic spacer from the inside of the lever clamp
Install the OneUp I-spec II adapter into the lever clamp
Loosely reinstall the brake lever clamp onto the handlebar
Attach the remote body to the I-spec II adapter using your preferred mounting hole.
Torque the remote body to the I-spec II adapter using a 3mm hex to 3Nm
Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
Torque the brake lever clamp to the manufacturer's recommendation

Shimano I-spec EV (XTR M9100 onward)

Remove the lever mounting bolt completely from the left brake using a 4mm hex
Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp
Install the OneUp supplied T-nut into the curved recess on the hinged clamp
Reinstall the brake lever clamp onto the handlebar
Install the OneUp supplied IS-EV adapter onto the T-nut
Attach the remote body to the IS-EV adapter using your preferred mounting hole.
Torque the remote body to the IS-EV adapter using a 4mm hex to 3Nm
Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.

SRAM Matchmaker X

Remove Brake lever mounting screw and hinged clamp using a T25 Torx
Install the OneUp supplied T-nut into the curved recess on the hinged clamp
Reinstall the brake lever clamp onto the handlebar
Install the OneUp supplied Matchmaker X adapter onto the T-nut
Attach the remote body to the Matchmaker X adapter using your preferred mounting hole.
Torque the remote body to the Matchmaker X adapter using a 3mm hex to 3Nm
Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.
Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.

OneUP

OneUp DROPPER REMOTE CLAMP 22.2 HANDLEBAR - V2

90.00 NIS

Dropper post remote clamp used to convert existing clamp on the OneUp Dropper Remote.

INSTALL INSTRUCTIONS

22.2mm Clamp

Loosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano)
Attach the remote body to the clamp using your preferred mounting hole.
Torque the remote body to the clamp using a 3mm hex to 3Nm
Loosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever
Snug the 22.2mm clamp to 1Nm max.

Work less Ride more

NOT JUST FOR ENDURO RACERS.

FEATURES

SPECS

GUIDE SETUP INSTRUCTIONS

BASH REPLACEMENT INSTRUCTIONS

SPECS

WHY DO I NEED A GUIDE AND A NARROW WIDE CHAINRING?

FEATURES

SPECS

GUIDE SETUP INSTRUCTIONS

MTBR 5 STAR REVIEW - READ THE FULL REVIEW HERE

FEATURES

SPECS

FEATURES

SPECS

SPECS

Dropper post remote clamp used to convert existing clamp on the OneUp Dropper Remote.